Flat End Assembly w/ DTRs + Airdam
Flat End Assembly w/ DTRs + Airdam
Flat End Assembly w/ DTRs + Airdam
Flat End Assembly w/ DTRs + Airdam
Flat End Assembly w/ DTRs + Airdam
Flat End Assembly w/ DTRs + Airdam
Flat End Assembly w/ DTRs + Airdam
Flat End Assembly w/ DTRs + Airdam
Flat End Assembly w/ DTRs + Airdam
Flat End Assembly w/ DTRs + Airdam
Flat End Assembly w/ DTRs + Airdam
Flat End Assembly w/ DTRs + Airdam

Flat End Assembly w/ DTRs + Airdam

Regular price$532.00
/
Shipping calculated at checkout.
  • Worldwide Shipping Available
  • Questions? Contact Us Before Purchasing

This Is A Complete Flat End Assembly With All Required Hardware, Double Tap Rails And An Airdam Assembly. This Single End Assembly Caps Off The End Of The Rack Maintaining The Flat Profile That Continues Off Of An Attached Intermediate With Existing Double Tap Rails. The Top Rail Of This Assembly Sits 3" Shorter In Length Than Its Lower Welded Assembly. This End Has The Removable Airdam Assembly Which Is  Used At The Front Of A Cargo Rack System To Deflect Air Over The Rack To Reduce Wind Noise. [Note This Airdam Is Designed For Use With A System Running DTRs]. The Overall Rack Length Will Be Increased By 15" (38.10 cm) And Comes With The Necessary Hardware To Bolt Into Your Existing Setup.

Each Assembly Contains The Following:

  • (2) Flat Ends (Driver & Passenger Sides)
  • (2) Flat Upper Tubes
  • (2) Hinge Mount Standard Assemblies (W/ Mounting Hardware Selected Above Unless No Mounts Or Hardware Option Selected)
  • (4) Connector Slug 316 Stainless Hardware Sets 
  • (8) Threaded Slugs
  • (8) Threaded Slug 316 Stainless Hardware Sets
  • (4) Crossbars Of Selected Length
  • (1) Airdam Assembly (Airdam & Mounting Hardware) Of Selected Length 

Optional Selections

MOUNTING STYLE   

    • Track Mount - These Zinc Coated Track Nuts Are For Use With YAKIMA® or Equivalent Extruded Aluminum Track Systems 
    • Hard Mount - This Mounting Style Uses Drilled Holes And Expansion Nuts To Affix The Mount To The Mounting Surface
    • None - No Mounts Or Mounting Hardware Is Included And Will Be Up To The Installer

FINISH

    • Textured Black - A Durable Fine Textured Black Powdercoat Finish
    • Raw - Raw Aluminum Finish With No Surface Prep*

WIDTH

    • Choose Overall Rack Width Measurement - These Are Not The Measurement Of The Crossbars Themselves, But Using The Selected Crossbar Sets The Overall Rack Width - Custom Widths Are Available By Contacting Our Sales Team At Info@Zombieracks.com 

*Corrosion Resistance Is Only Achieved Through A Post Applied Finish On The Raw Aluminum Components (I.E - Powdercoat Or Anodizing). Raw Finish Will Not Provide ANY Corrosion Resistance And MUST Be Coated Before Installation. 

All Domestic Sales Ship UPS Ground From Our Warehouse In Southern California

Should You Need Expedited Shipping, Please Contact Us Directly And A Team Member Can Help Quote Expedited Shipping Services

International Customers Should Contact Us Directly To Arrange Shipping Prior To Ordering, We Typically Ship UPS International Economy

All Return Shipments Must Be Authorized By Zombieracks With A Given RMA Number

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

About your brand

Pair large text with an image to tell a story, explain a detail about your product, or describe a new promotion.

You may also like


Recently viewed